Computer Operation; Specifications - Body Flex Sports Body Power BST800 StepTrac Owner's Manual & Parts List

Computer Operation

Operation Procedures
FUNCTIONS
SCAN : The monitor will then rotate displaying through the following functions: time,speed,distance,
calories and odometer. Each function will display for 5 seconds.
TIME
: Displays the total amount of time using the machine.
SPEED : Displays current speed.
DISTANCE : Displays the distance traveled.
CALORIES : Displays the amount of calories burned.
ODOMETER : Displays total accumulated distance.
PULSE
: Hold the pulse sensor 6-7seconds and read your heart rate per minute.
NOTE
1. If the display is faint or shows no figures ,please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes .
3. The monitor will auto-power on when exercise and/or motion input is detected.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating when you stop
exercising for 4 minutes .

Specifications

AUTO SCAN
TIME
SPEED
CALORIES
ODOMETER
DISTANCE
BATTERY TYPE
PULSE RATE
OPERATING TEMP
STORAGE TEMP
BST800
Every 6 seconds
00:00-99:59 min
Max 999.9 mi./H
*IMPORTANT NOTE :
0.0-999.9 KCal
Please remember that the functions in this computer are only meant to be tools to
0.0-9999 mi.
monitor your workout progress; they are not meant to provide medical information
0.0-999.9 mi.
or be used for medical purposes. Please consult a physician before beginning any
2 pcs of AAA
workout program.
40-240 bpm
32°F - 104°F
14°F - 140°F
Key Function
MODE :
Press this button to select the display function of your
choice.
RESET :
Hold MODE button for 3 seconds to reset all value to
zero.
UP DOWN :
Press UP DOWN to set workout level
Page 12