Operation - Milwaukee M18 FSSM32 Operator's Manual

Locking/Unlocking the Lever Arm
The lever arm should be locked any time the tool is
To lock the lever arm, push back on the lever arm
collar (1) and lower the lever arm (2) push the carry
1
To unlock
back on lever arm collar (fully compress the spring)
2
ONE-KEY™
To learn more about the ONE-KEY™ functionality for
this tool, please refer to the quick reference included with
download the ONE-KEY™ app, visit the App
Store
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready
Blinking Blue Tool is actively communicating with
Blinking Red Tool is in security lockout and can
be unlocked by the owner via the

OPERATION

WARNING
changing or removing accessories.
To reduce the risk of short circuit, when setting tool
To reduce the risk of injury, wear safety goggles
or glasses with side shields. Always wear leather
2
3
3
1
forward
the wheels of the tool
reverse (counterclockwise) rotation, turn the
towards the wheels of the tool
lock
switch to the cent
or remove the battery pack before performing
maintenance, transporting the tool, changing ac-
cessories, storing the tool and any time the tool
Place the tool at a distance no greater than two feet
Pull cable out of its carrier and into the rear guide
the drain from the tool, minimi ing exposed
cable
Continue feeding the cable until approximately
Rotating cable while still connected to their carriers
position
If needed, attach additional sectional cables ac-
Disconnecting Sectional Cables"
Continue feeding cable into the drain until the
When the clog is reached, move the cable in a back
The cable feed system controls the advancement
feed
reverse switch is in forward
retract
reverse switch is in reverse
Using Manual Operation
To feed the cable:
Pull the feed collar outward and rotate to Spin O
Grasp the cable close to the front collar and pull
enough cable from the machine to start cable in
Press down on lever arm with one hand while
5
position O
WARNING!
WARNING!
-