GENERAL POWER TOOL attached to a rotating part of the power tool may SAFETY WARNINGS • Do not overreach. Keep proper footing and Read all safety warnings, instruc- WARNING This enables better control tions provided with this power tool. Failure to •...
to another. Shorting the battery terminals together SPECIFICATIONS Cat. No........... Volts 18 DC Battery Type M18™ Charger Type M18™ contacts eyes, additionally seek medical help. 0 - 4500 FUNCTIONAL DESCRIPTION excessive temperature. • Follow all charging instructions and do not charge Charging range may damage the battery and increase the risk 1.
Page 4
WARNING To reduce the risk of injury, Max Capacity ........55 mm (2.2") always wear safety goggles or glasses with For use with ........M18 FSGC-0 side shields. M18™ FUEL™ Drywall Screw Gun Adjusting the Depth of Drive To adjust the depth of drive, rotate the depth of The chuck is removed from the tool before attaching collated attachment.
Page 5
Using the Control Switch Depth Adjustment Using Nose Cone The control switch may be set to three positions: Start with about 1.6 mm (1/16") forward, reverse and lock. Always allow the motor clearance between the head of to come to a complete stop before using the control the screw and nose.
Page 6
® MILWAUKEE spare parts. Should components need to be replaced which have not been described, ® please contact one of our MILWAUKEE service agents. Please visit www.milwaukeetools.com.au/ www.milwaukeetools.co.nz or contact our customer service centre (Australia Toll Free Telephone Number 1300 645 928) (New Zealand Toll Free...
Page 8
SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 FSGC and is the answer not in the manual?
Questions and answers