Liquid Crystal Display - Caliber RMD 069 Installation Manual

SELECT MODE
By pressing this button(3) to go to different function mode:
- Tuner (radio)
- USB
to go to this mode USB device must be connected.
- Memory Card
to go to this mode must be have a Memory Card in.
- AUX in put
DISPLAY
Press DISP button (4) to operate as the conversion of each display mode as follow:
- Time is displayed for 5sec when DISP key is pressed, and it returns to its
previous display ( Folder, File name...) unless DISP key is pressed again.
3) From the clock mode, when DISP Key is pressed for longer than 1sec,
clock mode switches to clock Adjusting mode and the clock display
begins flashing. At this time clock can be changed by pressing (+/-),
or the ENCODER VOLUME.

LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (5).
RESET
RESET button (6) is placed on the housing and must be activated with either
a ball point pen or thin metal object. (Do not use sharp object to avoid damaging
the unit.) The RESET button (6) is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
08
GENERAL OPERATIONS