BMW Motorrad R 1200 GS Rider's Manual page 133

Press bottom of air filter into
air filter housing, making sure
not to bend its layers in the
process.
Lay suction pipe on air filter
housing and press into brack-
et 2.
Slide retaining brackets 1 into
holder until they audibly click
into place.
Make sure that throttle valve
cable is seated in guide 4 of
intake manifold and throttle
valve is resting against stop.
Position tank cover and install
two screws 5.
Press side panel into bracket in
area 4.
Install two screws 2 and
screw 3.
Press side cover 1 into two
mounts.
Installing driver's seat (
8
131
z
70)