BMW Motorrad R 1200 GS Rider's Manual page 119

Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove mounting bolts 1 of
brake calipers on left and right.
Press brake pads in brake
caliper 2 apart slightly by
rocking back and forth A in
relation to brake disks 3.
Carefully pull brake calipers
back and out until clear of
brake disks.
with BMW Motorrad Integral
ABS II OE
Remove screw 1 and take ABS
sensor out of hole.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Mounting front wheel stand
( 121)
8
117
z