Install screw 1.
Replacing additional
OA
headlight bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Open connector 1.
Remove screw 2.
Take off headlight housing.
Remove four screws 3.
Remove bulb cover 4.
Remove bulb 5 by turning
counterclockwise.
Replace defective bulb.
Bulb for additional head-
light
with additional headlight
H11 / 12 V / 55 W
8
127
z
OA