CDVI I180SR Installation Manual page 2

INSTALLATION MANUAL
I180SR - I400SR - I500SR - I180ER - I300ER - I500E
Surface mount or Mortice Stainless steel Electromagnetic Locks
Thank you for buying our products and for the confi dence you placed
in our company.
1] PRODUCT PRESENTATION
Stainless steel.
Surface mounting or mortice**.
Monitored**.
Holding force: 180, 300, 400 or 500kg**.
Security rope**.
High corrosion resistance.
Delivered with armature plate.
No mechanical wear.
Ease of installation.
Recommended for outdoor use.
Fail safe (Door unlocked when
power off).
Buit-in varistor: Electronic protection
to eliminate back EMF.
Electromagnetic lock dimensions (L x W x D):
- I180SR = 175 x 32,5 x 22mm,
- I400SR = 230 x 43,5 x 29,5mm,
- I500SR= 230 x 61 x 41mm.
- I180ER = 201 x 32 x 22mm,
- I300ER = 228 x 38 x 27mm,
- I500E = 288,5 x 64 x 37,5mm.
Armature dimensions (l x w x d):
- 180kg = 130 x 32 x 9mm,
- 300kg = 185 x 38 x 11mm,
- 400kg = 185 x 45 x 12mm,
- 500kg = 185 x 60 x 12mm.
Power supply: 12/24V dc.
Power absorption:
- 12 V DC = 550mA,
- 24 V DC = 275mA.
2] REMINDERS AND RECOMMENDATIONS
The function of an electromagnetic lock is to ensure the locking of an access point. This document is a guide
of installation which will allow you to secure the installation according to the characteristics of the product,
the site and the environmental requirements.
APPROVAL RELATIVE TO EMERGENCY EXITS
In the case of an installation of electromagnetic lock on emergency exits, it is imperative to make sure that
these exit points will be automatically free in case of fi re alarm, to open in the event of a fi re alarm to allow
evacuation of the premises. The electromagnetic lock installed on emergency exits must be in accordance
with the fi re approval department (Ex: In France = NF 61-937).
For more information, contact CDVI, the local fi re offi cer or the safety offi cer responsible for the building.
cdvi.com
2
cdvigroup.com
Refs Holding force
I180SR 180kg
I400SR 400kg
I500SR 500kg
I180ER 180kg
I300ER 300kg
I500E 500kg
EC certifi cation
IP54
WEEE
RoHS
* Refer to limited lifetime warranty conditions.
EN
Monitored
-
Recommended
power supplies
ARD212 BS602
** Depending on the version.