Security Tab - Acer AN515-51 Service Manual

Security Tab

The Security tab allows the user to configure and protect the computer from unauthorized use.
Information Main
Supervisor Password Is:
User Password Is:
HDD0 Password Is:
HDD1 Password Is:
Set Supervisor Password
Set User Password
Set HDD0 Password
Set HDD1 Password
Password on Boot
Secure Boot Mode:
Erase all Secure Boot:
Select an UEFI file as
for executing :
Restore Secure Boot to
Factory Default :
Current TPM (TCM) State :
Change TPM (TCM) State :
Clear TPM (TCM) :
F1 Help
Exit
Esc
Item Name
Supervisor
[Set] / [Clear]
Password
User Password [Set] / [Clear]
HDD Password [Set] / [Clear]
2-8
Advanced Security Boot
Clear
Clear
Clear
Clear
[Enter]
[Enter]
[Enter]
[Enter]
[Disabled]
Standard
[Enter]
[Enter]
[Enter]
Install
[Enable]
[Clear]
Select Item F5/F6
Select Menu
Enter
Figure 2-4. BIOS Security (Windows 10)
Table 2-13. BIOS Security Tab Parameters (Windows 10)
Example
InsydeH20 Setup Utility
Exit
Change Values
Select Sub-Menu
►
This field indicates if Supervisor Password is set or not.
• [Set]: Supervisor Password is set.
• [Clear]: Supervisor Password is not set.
The default value is [Clear].
This field indicates if User Password is set or not.
• [Set]: User Password is set.
• [Clear]: User Password is not set.
The default value is [Clear].
This field indicates if HDD Password is set or not.
• [Frozen]: If HDD status is frozen.
• [Set]: HDD Password is set.
• [Clear]: User Password it not set.
The default value is [Clear].
For NVMe SSD which doesn't support HDD password,
BIOS must display "HDDx:NVMe SSD don't support
HDD password" .
Item Specific Help
Supervisor Password controls access
to the whole setup utility. It can be
used to boot up when Password on
boot is enabled.
F9 Setup Defaults
F10 Save and Exit
Remark
System Utilities
Rev. 5.0