Acer AN515-51 Service Manual page 44

Item Name
Touchpad [Advanced] / [Basic]
Wake on USB
[Enabled] / [Disabled]
while lid closed
Lid Open
[Enabled] / [Disabled]
Resume
D2D Recovery [Enabled] / [Disabled]
GPT Partition [None] / [Save] /
Recovery [Restore]
Clear GPT
[None] / [Clear]
Partion
GPT Partition [No Record] / [Saved,
Record Date/Time]
2-6
Example
• When end user selects "Advance", it follows auto
select mechanism based on OS type to decide I2C or
PS2.
• When end user selects "Basic", if OS type is Win8.1
and above, I2C controller will be enable but no I2C
PTP definition. If OS type is not win8.1 and above,
both I2C controller and I2C PTP device will not be
enabled. PS2 device must be defined.
• If enabled, USB devices can wake the system, even if
the lid is closed.
• The default value is [Disabled].
• System will resume from S3 state by Lid open.
• The option is only visible and working on non-
connected standby supported system
• Default value depends on project definition.
• This function enables/disables Acer disc-to-disc
Recovery.
• To do Acer disc-to-disc system recovery via Alt+F10
key during POS.
• None: Do nothing.
• Save: Choose to save current GPT partition.
• Restore: Restore the GPT partition previously saved
• When end user choose to save/restore GPT. partition,
pop up the confirm message again, than take action
immediately.
• The option auto hidden if it's not GPT partition.
• None: Do nothing
• Clear: Gray out when no saved data. Select to clear
saved record.
• Record of the saved GPT partition data. Show the
date and time for the saved record.
• The option auto hidden if it's not GPT partition.
Remark
System Utilities