Cal-Royal F7700x120 Installation Instructions

INSTALLATION INSTRUCTION FOR F7700x120
FIRE SURFACE VERTICAL ROD EXIT DEVICE
NO TE: ALL FIRE RATED APPLICATION ARE REQUIRED TO USE THE SEX BOLTS.
"--J
AUX FIRE
LATCH ASS'Y(TOP)
,�- TOP ROD
AUX FIRE
LATCH ASS'Y(TOP)
HORIZONT
� ?
Ge CHASSIS
l
---­
CHASSIS
ASSEMBL Y
I-
( LHRB )
PULLMAN LATCH
__
..,._ TOP CHASSIS
,'---- ,
'---. ASSEMBLY
,
�-'
,',
I �
,
TOP
ROD
GUIDE
MOUNTING
RAIL
LIFT ARM
MAIN SLIDE
STEEL BOTTOM COVER
VERTICAL
� CHASSIS
1 --- STEEL TOP COVER
SURFACE OF DOOR FOR
EXIT DEVICE APPLIED MUST
BEFORE INSTALLING DEVICE, PLEASE CHECK:
1. IF DOOR FITTED AND HUNG.
2. SIZE OF EXIT DEVICE, FUNCTION AND DESIGN ...
2.1. 36"DOORS, CAN BE CUT TO FIT DOORS DOWN TO 30"
WIDE.
2.2. 48"DOORS, CAN BE CUT TO FIT DOORS DOWN TO 36"
WIDE.
2.3. HAND OF DEVICE AGAINST APPLICATION
RIGHT HAND
REVERSE BEVEL
TO CHANGE HAND OF F9860V EXIT DEVICE.
1.REMOVE CHASSIS PINS AND MAIN SLIDE.
HEAD COVER
2.REMOVE LIFT LEVER PIN AND LIFT LEVER.
3.REASSEMBLE LIFT LEVER AT OPPOSITE SIDE, AS SHOWN.
4.REPLACE MAIN SLIDE AND CHASSIS PINS.
END CAP
RAIL MOUNTING
BRACKET
SLIDING
SHIM
OUT
_A�
LEFT HAND
• REVERSE BEVEL
� �