Connecting The Memory Pc Board - Fronius Galvo RECERBO Installation Instructions Manual

Connecting the
Memory PC
Board
(3)
(2)
(1)
1
CAUTION! Danger of inverter-damage due to connecting an improper memory
PC board.
Connecting an improper memory PC board may cause overheating of several
electronic components. This could cause thermal damage which can in turn lead
to fires.
When connecting a memory PC board, make sure that the power limit of the
memory PC board corresponds to the power class of the inverter:
For Fronius Galvo 1.5 and 2.0 only use memory PC boards with a power limit
</= 2.0 kW!
For Fronius Galvo 2.5, 3.0 and 3.1 only use memory PC boards with a power limit
> 2.0 kW!
In the case of replacement consider and compare inverter ratting plates!
(4)
Push clamping devices (1) and (3) out-
1
wards
Swing out the RECERBO PC board (2)
2
from the mounting support
IMPORTANT! When connecting the me-
mory PC board, make sure that all pins of
the RECERBO PC board are positioned
properly in appropriate connection sockets
of the memory PC board.
Connect the memory PC board to the
3
pins (4) of the RECERBO PC board
17