Epson Stylus Color 980 Manual page 15

For Windows 98, 95, 2000, and NT 4.0 users
Windows 98, 95, 2000, and NT 4.0 users must first install the
printer software, and then, if you are connecting via the USB port,
check to ensure that the USB cable is correctly installed. If you are
connecting via the parallel port, proceed to "Installing the Ink
Cartridges" on page 18 after installing the software.
Note:
When using Windows 2000, if you do not follow the steps below to
install the printer software, Microsoft's Universal driver may be
installed instead. To see if the Universal driver has been installed,
right click anywhere in the printer driver window and then click
About in the list that appears. If a screen containing the words
Unidrv Printer Driver is displayed, follow the steps below to
reinstall the printer driver.
If the Digital Signature Not Found dialog box appears during the
installation process, click Yes. If you click No, you must reinstall
the printer software as described below.
Installing the software
Follow the steps below to install the printer software.
1. Make sure that your printer is off.
2. Turn on your computer and start Windows. If the New
Hardware Found screen or any other Wizard appears, click
Cancel.
11