Epson Stylus Color 980 Manual page 17

6. After turning on the printer, the Setup utility opens
automatically. Follow the on-screen instructions to install the
ink cartridges, check the print head nozzles, and clean the
print head. When a message appears informing you that the
setup is complete, click OK.
Note:
If the Setup utility does not start, proceed to "Installing the Ink
Cartridges" on page 18 to install the ink cartridge using the
printer's control panel.
7. When a message appears informing you that the installation
is complete, click OK.
Note:
If an error message appears, either the printer driver or the EPSON
USB printer device driver is not installed correctly. See
"Troubleshooting" in the Daily Use guide for details.
After the setup is complete, proceed to "Printing Your First Page"
on page 25 to print your first page.
Ensuring that the USB driver is installed correctly
After installing the software, USB users should follow the
directions below to confirm that the USB driver is installed
correctly.
Note:
The illustrations used in this section show the procedure for
Windows 98.
1. Click the Start button, point to Settings, and then click
Printers. Make sure that the icon for your printer is displayed
in the Printers window.
13