Using The Radio - Fm Mode - Bush KS536 Instruction Manual

Using your BUSH DAB Mini Mono DAB Radio
Frequency - the display will show the frequency of the station being broadcast.
Signal error - This is displayed as a number between 0-99. It would not be possible to
satisfactorily listen to a ratio station with a signal error rate of 30 or above.
Audio Bit rate - The display will show the digital audio bit rate being received.
Programme type - this describes the style of the programme. If the information is not
available the display will show '<Programme type>'.
Audio mode - the display will show if the station being received is stereo or mono.
Power - display power supply status.
Time and date - the time and date will be automatically updated by the radio
time signal.
DAB Mode –Factory reset
Moving the radio to another location in the country the pre-tuned and stored DAB
stations may no longer be available and it will be necessary to reset the radio back to
the factory settings.
1. Press and hold INFO/Menu button, use the Previous (
until "system" is displayed and press the Enter button to confirm .
2.Press the Previous ( ) or Next ( ) buttons to skip to Factory reset, press Enter
button to confirm your choice ,the "Factory Reset?" will be displayed, using the
Previous ( ) or Next ( ) buttons to choose "Yes " and press Enter button confirm
to restart your radio. The message "Restarting ..." will be showing on display to
restart. If "NO" to cancel your choice.

Using the radio - FM MODE

1.Turn the radio on, press Mode (
display will show 'FM' and the radio will automatically tune to the nearest station and
then the display will show the station name, or frequency if RDS not available.
2.To search manually, press the Previous ( ) or Next ( ) buttons, each press will
increment the frequency by 0.05MHz.
3. To activate auto search , press and hold Previous ( ) or Next ( ) buttons or press
scan button, and the radio starts to scan up the frequency band, the display will show
"scanning ...", and it will stop automatically once station has been found.
FM Display Modes
This function allows information relating to the current station to be shown in the
16
) Standby button and select the FM mode. The
Using your Bush DAB Mini Mono Radio
) or Next ( ) buttons