Sub-Error Codes Related To The Robotic - Overland Tandberg NEO S Series Service Manual

NEO S-Series Library Service Manual
Error
Code Description
FB Drive logged out
FC Internal SCSI command failed
with check condition
FD Internal SCSI command
timeout

Sub-error Codes Related to the Robotic

01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
20
21
22
23
24
25
26
27
29
10400666-005
User Action
Retry operation; if not successful
contact technical support
Retry operation; if not successful
contact technical support
Retry operation; if not successful
contact technical support
Mechanical initialization failure
Connection to slave robotic failed
Error motor initialization
Error during gripper close
Error slider home positioning
Error elevator home movement
Error during sled movement to rotation position
Error during rotation initialization, get range failed
Error elevator init
Error during rotation to far position
Error first sled init, move to sensor failed
Error during sled movement to rotation position
Error during rotation to drive position
Error slider init, get range failed
Error during slider forward movement
Error gripper init, get range failed
Error during slider home movement
Error during rotation to FAR position
Error sled init, move to sensor failed
Error during sled move – check shipping lock
Error Inventory scan
Error during gripper close
Error slider home movement
Error during move gripper to scan POS
Error reading bar code label
Error during move sled to scan position
Error during move elevator to scan position
Error during sled preposition movement
Error during closing gripper
©2015-20 Overland-Tandberg
Event Codes and Acronyms
Critical Component Status
Drive probably defect
Drive probably defect
Drive probably defect
43
