Sub-Error Codes Related To The Library - Overland Tandberg NEO S Series Service Manual

NEO S-Series Library Service Manual
73
80
81
82
90
91
92
93
94
95
99
A0
A1
A2
A3
A4
A5
A6
A7
B0
B1
B2
B3
B4
B5

Sub-error Codes Related to the Library

All libraries
81
88
90
91
92
93
94
95
96
10400666-005
Error during move sled to block
Opening mail slot failed
Error during movement to mail slot open position
Error during moving back - sensor was found
Movement to home position failed
Elevator movement to home position failed
Error during sled movement to rotation position
Error during rotation to home or far position
Sled movement to home sensor position failed
Sled movement to transport position failed
Error during rotation movement to rotation min position
Movement to mail slot failed
Sled movement to sensor failed
Sled movement to rotation position failed
Elevator movement to home position failed
Error during rotation to far position
Sled movement to mail slot position failed
Error during elevator movement to position
Error during mail slot detection
EEPROM on robotics controller not accessible or error during r/w operation
Save/restore configuration settings: not enough internal memory available
for creating the file and restoring the file respectively
Save/restore configuration settings: restore buffer corrupted, checksum
calculation failed
Save/restore configuration settings: data base field corrupted
Save/restore configuration settings: invalid personality
Save/restore configuration settings: invalid file
Tape drive wake up failed
Error accessing slot status
Robotic load not reached tape present sensor
No activity after <Load> command
Timeout while loading tape
No activity after <Load> command
Timeout drive unload
Tape drive terminated unsuccessfully
Tape not ejected at robot unload
©2015-20 Overland-Tandberg
Event Codes and Acronyms
45
