KENT KCH205-002 Instructions Manual

ASTRO PORTABLE LPG CABINET HEATER
IMPORTANT:
PLEASE READ CAREFULLY BEFORE USE
These instructions should be read in conjunction with the
Assembly and Safety Instructions on pages 3-7.
After initial assembly is complete (see page 3) follow these
easy steps:
Step 1
Remove the cylinder cover from the heater and set to one
side. Place the cylinder into the heater.
Step 2
Ensure the valve on the cylinder is facing the rear of the
heater and connect the regulator to the cylinder valve.
Step 3
Turn on the cylinder by opening the valve fully in an
anti-clockwise direction. ALWAYS check for leaks with a
soapy water solution.
Important: Retain these instructions for future use.
4105-11/14
Model No. KCH205-002
STEP BY STEP LIGHTING INSTRUCTIONS
Step 4
Replace the cylinder cover.
Step 5
Position the heater in the area you wish to heat. Pay special
attention to the ventilation requirements and the proximity of
the heater to flammable objects or fabrics etc, see overleaf.
Step 6
Stand to one side of the heater
when lighting. NEVER stand
directly in front of the heater
when attempting to light the
heater. Take care that your
clothing is not in close contact
with the safety guard or in front
of the heater.
NEVER stand in front of
heater when lighting.
ALWAYS stand to one
side when lighting heater.
NEVER kneel in front of
heater when lighting.