KENT KPE135-062 Owner's Instruction Manual

Optimum radiant heater - 1800w

Advertisement

OPTIMUM RADIANT HEATER - 1800W
Congratulations on your purchase of a Kent
Outdoor Electric Appliance. Please read the
following instructions carefully before use and
retain for future reference.
BEFORE FIRST USE
• Read and follow all the instructions below
even if you feel you are familiar with the
appliance.
• Remove the packing and make sure that
the appliance is in tact. If in doubt do not
use the appliance and contact the place of
purchase.
• Do not leave packaging materials such as
bags and staples within reach of children.
• Dispose of packaging carefully and with
consideration for the environment.
For your convenience record the date you
received the appliance on the warranty page
of these instructions, and attach your proof of
purchase. Retain this information in the event
that a warranty service is required.
NOTE: The rating of this appliance (as marked
on the rating label) is based on specific
loading tests. Normal use or the use of
other recommended attachments may draw
significantly less power.
Remote control included. 2 x AAA batteries
required (not included).
5638-03/24
Model No. KPE135-062
OWNERS INSTRUCTION MANUAL
1
IMPORTANT SAFETY INFORMATION
Before attempting to operate this heater, the
following basic safety precautions should be
taken to reduce the risk of fire, electric shock
and personal injury. It is important to read
the instruction manual and to understand its'
applications, limitations and potential hazards
associated with this heater.
This heater is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning the use of the appliance by a
person responsible for their safety.
This heater is not designed for use within
1m or above a water source. It is important
that you read, understand and follow these
instructions very carefully. They are designed
for the safety of yourself and others ensuring
a long and trouble free service life from your
heater.
This electric heater complies with
New Zealand and International standards and
safety requirements. Repairs should only be
carried out by qualified persons using original
spare parts. Failure to do so may result in
considerable danger to the operator.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPE135-062 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KENT KPE135-062

  • Page 1 OPTIMUM RADIANT HEATER - 1800W Model No. KPE135-062 OWNERS INSTRUCTION MANUAL Congratulations on your purchase of a Kent IMPORTANT SAFETY INFORMATION Outdoor Electric Appliance. Please read the Before attempting to operate this heater, the following instructions carefully before use and following basic safety precautions should be retain for future reference.
  • Page 2: Safe Operation

    SAFE OPERATION • DO NOT use a 3rd party timer, or programmable system with this heater. Do not abuse the power cord • DO NOT touch any part of the heater while on, hot surfaces may burn. • Never tug or pull on the power cord to •...
  • Page 3: Electrical Data

    ELECTRICAL DATA Heater Specifications IMPORTANT This product is fitted with a sealed electrical Model No.: KPE135-062 connection plug that is compatible with the Heat Settings: 1800W heater, the mains supply for New Zealand Rating: 220-240V~, 50Hz and meets the requirements of international Unit Weight: 6.1kg...
  • Page 4: Installation

    INSTALLATION General Mounting Suggestions If unsure please discuss with your local hardware store. • Ensure the fixing screws are at least suitable for 10Kg each. • If fitting to a stud wall or ceiling ensure all fixing screws are into timber. Plasterboard IS NOT suitable by itself.
  • Page 5 Ceiling Mount with Chain Assembly Only use this mounting option if your ceiling is too high. 1. Attach the bracket (C) as noted below. 2. Cut the chain (D), not supplied, to desired length. 3. Use the nut and bolt to attach the chain to bracket (C) and bracket (B). 4.
  • Page 6: Positioning Of The Heater

    Positioning of the Heater 1. Position heater at least 200mm from the eave/ceiling eave lining or ceiling or wall at 90˚ to heater. 2. Position heater at least 1.8m above the floor. 3. Never position in front, above or below a power point.
  • Page 7: Cleaning And Care

    OPERATING INSTRUCTIONS CLEANING AND CARE 1. Plug into a 240V AC wall socket. IMPORTANT: Turn off the heater. Switch off the power switch and disconnect the 2. To turn on – switch the wall socket on. heater from the power socket. Wait for 3.
  • Page 8: Warranty Guidelines

    • Any alterations or modifications, including those affecting the product’s performance, Kent Optimum Outdoor Electric Heaters: operation, safety, durability or changes in 2 years from date of purchase. its intended use. Products used for business purposes will carry •...

Table of Contents