KENT KPE135-073 Owner's Instruction Manual

2000w sabre radiant tower heater

Advertisement

2000W SABRE RADIANT TOWER HEATER
Congratulations on your purchase of a Kent
Outdoor Electric Appliance. Please read the
following instructions carefully before use and
retain for future reference.
BEFORE FIRST USE
• Read and follow all the instructions below
even if you feel you are familiar with the
appliance.
• Remove the packing and make sure that
the appliance is in tact. If in doubt do not
use the appliance and contact the place of
purchase.
• Do not leave packaging materials such as
bags and staples within reach of children.
• Dispose of packaging carefully and with
consideration for the environment.
For your convenience record the date you
received the appliance on the warranty page
of these instructions, and attach your proof of
purchase. Retain this information in the event
that a warranty service is required.
NOTE: The rating of this appliance (as marked
on the rating label) is based on specific
loading tests. Normal use or the use of
other recommended attachments may draw
significantly less power.
5638-06/24
Model No. KPE135-073
OWNERS INSTRUCTION MANUAL
1
IMPORTANT SAFETY INFORMATION
Before attempting to operate this heater, the
following basic safety precautions should be
taken to reduce the risk of fire, electric shock
and personal injury. It is important to read the
instruction manual and to understand its'
applications, limitations and potential hazards
associated with this heater.
This heater is not equipped with a device to
control the room temperature. Do not use this
heater in small rooms when they are occupied
by persons not capable of leaving the room
on their own, unless constant supervision is
provided.
This heater is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or instruction
concerning the use of the appliance by a
person responsible for their safety.
This heater is not designed for use within 1m
or above a water source. It is important that
you read, understand and follow these
instructions very carefully. They are designed
for the safety of yourself and others ensuring a
long and trouble free service life from your
heater.
This electric heater complies with New Zealand
and International standards and safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts. Failure to do so may result in considerable
danger to the operator. When using any
electrically powered appliance, these basic
safety precautions should always be followed.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPE135-073 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KENT KPE135-073

  • Page 1 2000W SABRE RADIANT TOWER HEATER Model No. KPE135-073 OWNERS INSTRUCTION MANUAL Congratulations on your purchase of a Kent IMPORTANT SAFETY INFORMATION Outdoor Electric Appliance. Please read the Before attempting to operate this heater, the following instructions carefully before use and following basic safety precautions should be retain for future reference.
  • Page 2: Safe Operation

    SAFE OPERATION Do not abuse the power cord • Never tug or pull on the power cord to disconnect it from the mains supply socket. • Never carry your heater by its power cord. • Keep the power cord away from heat, oil, solvents and sharp edges.
  • Page 3: Electrical Data

    • Do not immerse in liquid or use the Heater Specifications heater near water as this could create an electrical shock hazard. Model No.: KPE135-073 • If the heater accidentally comes into Heat Settings: 1700W - 2000W contact with water, switch off the power Rating: 220-240V~, 50Hz supply and do not touch the heater.
  • Page 4 ASSEMBLY INSTRUCTIONS Assembly 1. Position the heater on a flat, dry, clean surface and ensure all parts are present. 2. Turn the heater upside down. Slide the Cover Flange (6) with the mirrored side up over the Base Bracket (5). 3.
  • Page 5: Usage Instructions

    USAGE INSTRUCTIONS CLEANING AND CARE Always place heater on a flat, stable horizontal IMPORTANT: Turn off the heater. Switch surface. off the power switch and disconnect the heater from the power socket. Wait for 1. Plug the heater into a power point and the heater to be completely cool before switch on at power point.
  • Page 7: Warranty Guidelines

    Products used for business purposes will carry • Additional damage to parts or components a 90 day warranty. due to consented use occurring after any of the above conditions. For full warranty terms & conditions please • Incorrect installation or commissioning. refer to our website: www.kent.co.nz.
  • Page 8 Kent is a registered trademark of Aber Living, Hamilton, NZ. ® www.Kent.co.nz...

Table of Contents