KENT KPE216-343 Owner's Instruction Manual

Mica panel heater

Advertisement

Quick Links

Congratulations on your purchase of a Kent
Portable Electric Appliance. Please read the
following instructions carefully before use and
retain for future reference.
BEFORE FIRST USE
• Read and follow all the instructions below
even if you feel you are familiar with the
appliance.
• Remove the packing and make sure that
the appliance is in tact. If in doubt do not
use the appliance and contact the place of
purchase.
• Do not leave packaging materials such as
bags and staples within reach of children.
• Dispose of packaging carefully and with
consideration for the environment.
• It is ideal to retain the appliance carton for
seasonal storage.
For your convenience record the date you
received the appliance on the warranty page
of these instructions, and attach your proof of
purchase. Retain this information in the event
that a warranty service is required.
NOTE: The rating of this appliance (as
marked on the rating label) is based on
specific loading tests. Normal use or the use
of other recommended attachments may draw
significantly less power.

IMPORTANT SAFETY INFORMATION

When using any electrically powered
appliance, these basic safety precautions
should always be followed.
4593-12/16
MICA PANEL HEATER
Model No. KPE216-343
OWNERS INSTRUCTION MANUAL
WARNING: DO NOT COVER in
order to avoid overheating.
• Do not cover or restrict airflow to the
inlet or outlet grilles in any manner as the
appliance may overheat and become a
fire risk.
• This appliance heats up when in use. To
avoid burns, do not touch the front of the
appliance or any of the grilles or vents.
• Do not use the appliance to dry clothes.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• CAUTION: In order to avoid a hazard
due to inadvertent resetting of the
thermal cutout, this appliance must not be
supplied through an external switching
device, such as a timer, or connected to
a circuit that is regularly switched on and
off by the utility.
To reduce the risk of fire, electrical shock or
injury to persons or property:
• To avoid overheating, keep airflow grilles
clear of dust and hair build up - especially
if you have indoor pets.
• Use only the voltage specified on the rating
label of the appliance.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPE216-343 and is the answer not in the manual?

Questions and answers

Summary of Contents for KENT KPE216-343

  • Page 1 MICA PANEL HEATER Model No. KPE216-343 OWNERS INSTRUCTION MANUAL Congratulations on your purchase of a Kent WARNING: DO NOT COVER in Portable Electric Appliance. Please read the order to avoid overheating. following instructions carefully before use and retain for future reference.
  • Page 2 • This appliance is not intended for outdoor use. Heater Specifications • Always operate upright, on a flat surface only. Model No.: KPE216-343 • CAUTION: This product is NOT suitable to Heat Settings: 1200W / 2000W be used on long pile carpets or rugs.
  • Page 3 ASSEMBLY INSTRUCTIONS This heater is supplied with both wall mounting brackets for fixed installation and wheels for portability. Portable Assembly 1. Position the heater carefully upside down and slot the wheel assembly into the base of the heater at each end. Note: Each wheel assembly is marked with ‘L’...
  • Page 4 130cm ASSEMBLY INSTRUCTIONS 582.5cm Fixed Installation Continued 2. Fix the three plastic rawl plugs supplied into the three holes in the wall. 76cm 3. Fix two screws supplied into two of the rawl plugs (A and B) leaving 5mm of the screw exposed to hang the heater (Fig.
  • Page 5 OPERATING INSTRUCTIONS NOTE: When switched on for the first time Thermostat Function a slight odour may be emitted for a few • Set the desired room temperature by minutes. This is harmless and occurs with most turning the thermostat dial clockwise to appliances as slight traces of dust or lubricants the desired position.
  • Page 6 SAFETY FEATURES CLEANING AND CARE Over-Heat Protection IMPORTANT: Turn off the heater. Switch off the power switch and disconnect the • This heater is protected with an over-heat heater from the power socket. Wait for protection cut-out facility that switches it off the heater to be completely cool before automatically if it over-heats.
  • Page 7 • Additional damage to parts or components due to consented use occurring after any of For full warranty terms & conditions please the above conditions. refer to our website: www.kent.co.nz. Kent ® is a registered trademark of Aber, Hamilton, NZ.

Table of Contents