KENT KPE216-408 Owner's Instruction Manual

KENT KPE216-408 Owner's Instruction Manual

Micathermic panel heater

Advertisement

MICATHERMIC PANEL HEATER
Congratulations on your purchase of a Kent
Portable Electric Appliance. Please read the
following instructions carefully before use and
retain for future reference.
BEFORE FIRST USE
• Read and follow all the instructions below
even if you feel you are familiar with the
appliance.
• Remove the packing and make sure that
the appliance is in tact. If in doubt do not
use the appliance and contact the place of
purchase.
• Do not leave packaging materials such as
bags and staples within reach of children.
• Dispose of packaging carefully and with
consideration for the environment.
• It is ideal to retain the appliance carton for
seasonal storage.
For your convenience record the date you
received the appliance on the warranty page
of these instructions, and attach your proof of
purchase. Retain this information in the event
that a warranty service is required.
NOTE: The rating of this appliance (as marked
on the rating label) is based on specific
loading tests. Normal use or the use of
other recommended attachments may draw
significantly less power.
Remote control included. CR2025 battery
required.
5271-11/20
Model No. KPE216-408
OWNERS INSTRUCTION MANUAL
IMPORTANT SAFETY INFORMATION
When using any electrically powered
appliance, these basic safety precautions
should always be followed.
WARNING: DO NOT COVER in order to
avoid overheating.
To reduce the risk of fire, electrical shock or
injury to persons or property:
• To avoid overheating, keep airflow grilles
clear of dust and hair build up - especially
if you have indoor pets.
• Use only the voltage specified on the rating
label of the appliance.
• Do not cover or restrict airflow to the
inlet or outlet grilles in any manner as the
appliance may overheat and become a fire
risk.
• Do not cover grilles, block entry or exits of
airflow by placing the appliance against
any surface. Keep all objects at least 1
metre from the back, front and sides of the
appliance.
• Do not locate in areas of high foot traffic,
ensure the power cord and heater are in
view to avoid accidents.
• Do not operate in areas where gasoline,
paint or other flammable liquids are used
or stored.
• This appliance heats up when in use. To
avoid burns, do not touch the front of the
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KPE216-408 and is the answer not in the manual?

Questions and answers

Summary of Contents for KENT KPE216-408

  • Page 1 MICATHERMIC PANEL HEATER Model No. KPE216-408 OWNERS INSTRUCTION MANUAL Congratulations on your purchase of a Kent IMPORTANT SAFETY INFORMATION Portable Electric Appliance. Please read the When using any electrically powered following instructions carefully before use and appliance, these basic safety precautions retain for future reference.
  • Page 2: Heater Specifications

    Heater Specifications • Do not remove the plug from the power socket until the appliance has been switched off. Model No.: KPE216-408 Heat Settings: 1000W / 2000W • Always hold the plug when removing it Rating: 220-240V~, 50Hz from the wall, do not pull the cord.
  • Page 3: Minimum Clearances

    ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS 1. Position the heater carefully upside down NOTE: When switched on for the first time and position the base supports over the a slight odour may be emitted for a few screw hole in the base of each end of the minutes.
  • Page 4: Memory Function

    Note: The timer setting is not retained. lights will light up to indicate ‘high power’. Remote Control LOW Power HIGH Power • The remote control duplicates all the KPE216-408 1000W 2000W controls that are on the control panel. Please refer to the above instructions for operation.
  • Page 5: Cleaning And Care

    CLEANING AND CARE IMPORTANT: Turn off the heater. Switch off the power switch and disconnect the heater from the power socket. Wait for the heater to be completely cool before cleaning. • Vacuum clean air vents and grilles to remove dust from these areas. •...
  • Page 6: Warranty Guidelines

    Additional damage to parts or components due to consented use occurring after any For full warranty terms & conditions please of the above conditions. refer to our website: www.kent.co.nz. • Incorrect installation or commissioning. Kent is a registered trademark of Aber Living, Hamilton, NZ.

Table of Contents