Advertisement
Wear Your
Harness!
PRODUCT MEETS
INDUSTRY STANDARDS
RECOGNIZED BY
PARTICIPATING MEMBER
Get parts online at
www.HuntRiversEdge.com
Operator's Manual
CONNECT-N-CLIMB™
Climbing Aids
INCLUDES MODEL #'s:
RE723, 20' CONNECT-N-CLIMB
RE724, 15' CONNECT-N-CLIMB
RE725, 5' CONNECT-N-CLIMB EXTENSION
Maximum Height - 20'
Maximum Field Rating - 300 lb
Tree Diameter Range - 8" to 20"
GAS/OIL
RATIO
50:1
P/N: 17543
REV2: 03/15/16
© 2016 RETI
All Rights Reserved
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rivers Edge CONNECT-N-CLIMB RE723
Summary of Contents for Rivers Edge CONNECT-N-CLIMB RE723
- Page 1 Operator's Manual CONNECT-N-CLIMB™ Climbing Aids INCLUDES MODEL #'s: RE723, 20' CONNECT-N-CLIMB RE724, 15' CONNECT-N-CLIMB RE725, 5' CONNECT-N-CLIMB EXTENSION Wear Your Harness! GAS/OIL Maximum Height - 20' PRODUCT MEETS RATIO INDUSTRY STANDARDS Maximum Field Rating - 300 lb 50:1 RECOGNIZED BY Tree Diameter Range - 8"...
-
Page 2: Table Of Contents
Instructions should be kept in a safe place and reviewed at least annually. If for any reason you have a problem with your product, DO NOT return to the retailer, contact the Rivers Edge® cus- tomer service department at 800-450-EDGE (3343) for assistance. -
Page 3: Warnings
Operator's Manual CONNECT-N-CLIMB™ Climbing Aids MODEL RE723 / RE724 / RE725 WARNING TOTAL WEIGHT LIMIT - 300 LB Pull up a bow, backpack, or firearm or other equipment TREE DIAMETER RANGE - 8" TO 20" only after being secure in the treestand and a firearm must be pulled up with it unloaded, chamber open, and MAXIMUM USE HEIGHT - 20’... -
Page 4: Inspection And Maintenance
Operator's Manual CONNECT-N-CLIMB™ Climbing Aids INSPECTION AND MAINTENANCE SCHEDULE WARNING BEFORE EACH USE PERFORM THE FOLLOWING: Read and perform all inspection and maintenance tasks before each and every use. Replace any questionable • Inspect all webbing, rope, cord, and strap assemblies for components immediately with RETI original replacement wear or damage. -
Page 5: Assembly Instructions
Operator's Manual CONNECT-N-CLIMB™ Climbing Aids ASSEMBLY INSTRUCTIONS SET-UP AND USE INSTRUCTIONS Tools Needed- two 7/16” wrenches 1. Stand the assembled Connect-N-Climb up against a selected straight tree on dry, level ground. Feed the strap assembly 1. Attach one tree hugger (17558) to each stick section using (1) through the “pocket”... -
Page 6: Parts Explosion/Parts List
Operator's Manual CONNECT-N-CLIMB™ Climbing Aids 20' CONNECT-N-CLIMB PARTS 20' CONNECT-N-CLIMB PARTS LIST MODEL RE723 KEY # PART # DESCRIPTION QTY. 17513 TOP STICK SECTION 17512 MIDDLE STICK SECTION 17511 BOTTOM STICK SECTION 17558 TREE HUGGER 48250B BOLT 1/4-20 X 1-3/4" BLK ZN 48261B WASHER 1/4"... - Page 7 Operator's Manual CONNECT-N-CLIMB™ Climbing Aids 15' CONNECT-N-CLIMB PARTS 15' CONNECT-N-CLIMB PARTS LIST MODELRE724 KEY # PART # DESCRIPTION QTY. 17513 TOP STICK SECTION 17512 MIDDLE STICK SECTION 17511 BOTTOM STICK SECTION 17558 TREE HUGGER 48250B BOLT 1/4-20 X 3" HH BLK ZN 48261B WASHER 1/4"...
- Page 8 Rivers Edge® Treestands, Inc. 1160 Eighth Avenue, PO Box 755 Cumberland, WI 54829 800-450-EDGE (3343) | Fax 715-822-2124 Email: info@huntriversedge.com *All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product images...
Need help?
Do you have a question about the CONNECT-N-CLIMB RE723 and is the answer not in the manual?
Questions and answers