English - Philips HP4880/87 User Manual

EnglisH

6
introduction
The Philips JetSet Control has been specially designed to meet your
personal needs, giving you frizz-free, beautiful and shiny hair.
This hairdryer offers you a variety of heat and speed settings. In addition,
this hairdryer has a Jet position for an ultra-strong airflow and a Set
position for a cool shot. This gives you optimal styling freedom and
optimal control over your hairstyle.
You can visit our website at www.philips.com/beauty for more
information about this product or any other Philips beauty product.
general Description (Fig. 1)
Air inlet grille
A
Temperature slide switch
B
Airflow slide switch
C
JetSET switch
D
Hanging loop
E
Volume diffuser (HP4881 only)
F
Concentrator
G
important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the appliance corresponds to the
,
local mains voltage before you connect the appliance.
Check the condition of the mains cord regularly. Do not use the
,
appliance if the plug, the cord or the appliance itself is damaged.
If the mains cord is damaged, it must be replaced by Philips, a
,
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
Keep this appliance away from water! Do not use this product near
,
or over water contained in baths, washbasins, sinks etc. When used
in a bathroom, unplug the appliance after use since the proximity of
water presents a risk, even when the hairdryer is switched off.
For additional protection, we advise you to install a residual current
,
device (RCD) with a rated residual operating current not