Using The Sleep Function - Timex Satellite Series Manual

Xm ready alarm clock radio
Table of Contents

Advertisement

Press and release the
Alarm set 1 button or
alarm1 or alarm 2 icon. The currently set Wake To icon and wake to station/channel also appear. The unit returns to previous state
after 5 seconds, or if an Alarm set button is pressed again.
Resetting Alarms (when they are sounding)
Press the
Alarm reset button. The Alarm will stop and reset to sound again at the same time the next day. If alarm is not reset or
turned off, it will sound for 60 minutes and then reset for the next day. Pressing other buttons such as Volume, Mode, Sleep, etc. will
switch the unit to that mode and reset the alarm to go off the next day.
Using SNOOZE Function (when alarm is sounding)
Press the
Snooze/Dimmer button after the alarm sounds. The alarm will go off and will come on again in approx. 9 minutes. You
may repeat this cycle several times during the 1 hour alarm cycle.
When an alarm is NOT sounding (DIMMER):
Pressing the
Snooze/Dimmer button repeatedly will cycle through HI, MED, LOW display brightness.
The
Sleep button can be pressed while in any mode: XM, FM, AM, and AUX (line in). Sleep mode shuts theTMX1 off after the chosen
number of minutes. It does NOT shut off any AUX device plugged into the line in jack.
1. Pressing
Sleep button repeatedly will cycle through the following settings: 90 minutes, 60 minutes, 30 minutes, 15 minutes, OFF.
The sleep time remainng will show for 10 seconds, then the display will revert to showing the current time.
2. While in sleep mode, pressing the
next lowest setting.
3. Pressing the R Sleep volume button (on back of unit) repeatedly will adjust sleep volume.
NOTE: AUX devices continue to run after sleep mode shuts off the TMX1; their battery power may be drained if running on batteries.
Nap function can be used at any time, even when the unit is off. Nap will sound a buzzer within the selected number of minutes.
1. Pressing
Nap button repeatedly will cycle through the following times: 90 minutes, 60 minutes, 30 minutes, 15 minutes, OFF.
NOTE: SNOOZE does NOT function while NAP alarm is sounding.
Previewing an Alarm
Alarm set 2 button. The currently set alarm time is shown, and the corresponding

Using the Sleep Function

Sleep button will display the remaining sleep tme. Pressing it again will set sleep time to the
Using the Nap Function
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite tmx1

Table of Contents