Makita 9561CR Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2 Spiral Bevel Gear (large) on Spindle and Ball Bearing 6201DDW (cont.)
ASSEMBLING
Take the disassembling step in reverse.
Note: Be sure to apply adhesive to the threads of M4x16 Hex. socket head bolts (4pcs.) for securing Bearing box to Gear
housing complete when reusing the bolts.
[3] DISASSEMBLY/ASSEMBLY
[3]-3 Shaft Lock Mechanism
DISASSEMBLING
Disassemble Shaft lock mechanism as illustrated in Fig. 15, 16.
Fig. 15
Pin cap
1R350
Applying 1R268 to Shoulder pin 5 through the small Hole
on Pin cap, strike 1R268 with Hammer.
Now, Shoulder pin 5 comes out from Gear housing complete.
ASSEMBLING
(1) Be sure to use a new Pin cap for replacement and to remove all the plastic dust on Shoulder pin 5. (Fig. 17)
(2) Assemble the components for Shaft lock mechanism as illustrated in Fig. 18.
Fig. 17
Plastic Dust
Shoulder Pin 7
O Ring 6
1R268
Shoulder pin 7
Fig. 18
Insert Shoulder pin 5
through the Hole of Gear
housing complete.
Fig. 16
Impossible to reuse Pin cap, because
removal of Shoulder pin 4 damages the
inside surface of Pin cap, producing
plastic dust.
Pin cap
Release 1R268 from Pin cap, while paying
Attention that the Pin cap would not be
slung by Compression spring 8.
Assemble Pin cap by pressing it
to Shoulder pin 7.
Shoulder
pin 7
P 6/ 9
Pin cap
Compression
Spring 8
Pin cap
Compression
spring 8
Do not forget to assemble
Compression spring 8.