Table of Contents
Advertisement
R E C E I V E R S E C T I O N : M O D E L D A - R 4 S P
DISASSEMBLY PROCEDURE FOR DA-R4sP
1. Removing the top cover
1) Remove the seven top cover fixing screwsCas shown
i n F i g . 1 .
2) The top cover can now be removed by pulling it for-
ward.
Fis. I
2) As shown in Fig. 3, after the two tuner circuit board
fixing screws @ n.u" been removed, the front panel,
together with the indicator assembly and the graphic
equalizer circuit board. can be pulled forward.
3) Once the flat cables and the respective connectors are
removed, the front panel can be removed.
Tun€r circuit board
G r a p h i c e q u a l i z e r
circuit board
Indicator assemblv
Fis. 3
2. BemoYing the front panel
1) After the top cover has been removed. remove the
three front panel fixing screws @ and the four screws
@ a s s h o w n i n F i g . 2 .
sc.e*sO
Advertisement
Table of Contents
