A D J U S T M E N T P R O C E D U R; T S Y S T E M C O T I M A N D E R W I R I N G D I A G R A - Mitsubishi E-45P Service Manual

2) As shown in Fig. 14, remove the two screws 6à , and
remove the tonearm.
3) The phono cartridge can be removed by removing the
two screws (20.) .
7. Removing the motor
1) As shown in Fig. 16, the motor can be removed by re-
moving the three r"r"*r €1).
Phono canridç
Fis. 14
6. Removing the turntable platter
1) Removing the turntable platter sheet, set the turntable
platter to the position shown in Fig. 15.
2) Remove the drive belt from the motor, and remove the
E-ring from the turntable shaft. The turntable platter
should now lift free.
E-ring
Fis. 15
screws@
F i g . 1 6
8. Removing the main circuit board
1) Following step 1, remove the bottom cover,
2) As shown in Fig. 17. the main circuit board can be re-
moved by removing the four r"r"*r ۈ.
screws@
Fis.17