Motion Detection; Pir; Buzz; Device Update - Palermo Smart Camera Manual

24/7 PHONE SUPPORT 252-316-0108
Set the Alarm push ID/Alarm push Email:
Click the Device name on the APP, wait for the Playback /
Settings / Edit menu to pop up, then access the Setting /
Alarm setting submenu. In the Receive alarm message
area under alarm push Email, input the email address
where you want to receive alarm messages.

MOTION DETECTION:

Take the same steps as above to set the alarm. Then set
the Motion Detection to On. The camera will then send
alarm messages once there is any motion or change in
the monitoring location.

PIR:

Take the same steps as above to set the alarm. Then set
the PIR to On. The camera will then send alarm
messages once the PIR detects infrared from any person
or animal (only some models support this feature).

BUZZ:

Take the same steps as above to set the alarm. Then
set the BUZZ to On. The camera will start Buzzing until it
is disarmed manually.

DEVICE UPDATE:

Click the Device name on the APP, wait for the Playback /
Settings / Edit menu to pop up, then access the Setting /
device setup submenu. It will show the latest version and
confirm if you need to update to a newer version.
- 26 -