Ethernet Connection - Palermo Smart Camera Manual

24/7 PHONE SUPPORT 252-316-0108

Ethernet Connection:

Step:1
Unplug and re-plug your camera from the electrical outlet
so it can reload. When the camera starts beeping, connect
your Ethernet cable to your router and the back of your
camera. Once the Ethernet cable is plugged in, the
beeping will stop and there will be a green and yellow light
coming out of the back of the camera from the Ethernet
cable and a dim yellow light in the front of the camera
(Network Indicator light).
Step:2
Login to your app, on the device list screen you will see
highlighted in blue (discover new device). Tap on it.
- 10 -