Manually Adding Devices - Palermo Smart Camera Manual

24/7 PHONE SUPPORT 252-316-0108
YYP2P MANUALLY ADDING MULTIPLE DEVICES.
The camera can only be smart linked once. The first mobile device is
considered the initial device. Every device after that must be added
manually. FYI. there can only be (1) one account per app. Meaning, all
added devices must use the same account information exactly. Below
are the instructions for adding multiple devices.

Manually Adding Devices

The camera can only be smart linked once. The first mobile device is
considered the initial device. Every device after that must be added
manually. FYI. there can only be (1) one account per app. Meaning,
all added devices must use the same account information exactly.
Below are the instructions for adding multiple devices.
Manually Adding Devices Method 1 (With Mobile Data)
For devices connecting away from camera location
Install the app on the mobile device.
1)
Log into the app using the same login information you created
2)
for the initial setup device.
No need for the mobile device to be connected to the WIFI.
3)
On the All devices/devices list screen tap the (+) sign in the top
4)
right corner.
Add online Device
5)
Input the same Name as the initial device.
6)
Input the device id /(3CID) which is the 7 digits at the bottom of
7)
the camera under the barcode.
Input the same passcode as the initial device and tap (Save) in
8)
the top right of the screen.
Manually Adding Devices
- 14 -