Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. CYC100 RGBW 100W COB Cyclorama Wash www.prolight.co.uk User Manual...
Page 3
CYC100 RGBW 100W COB Cyclorama Wash The CYC100 from eLumen8 is a compact, quad colour cyclorama wash light suitable for theatre, stage or studio. The wide angle, 90° x 105° beam is designed to deliver rich, even tones across large areas while the COB LED technology ensures a perfect colour mix without any multi coloured shadows.
The installation should be checked annually by a qualified person. The eLumen8 CYC100 RGBW 100W COB Cyclorama Wash can be operated in a number of mounting positions as shown in the diagram above, hanging upside-down from the ceiling or truss, mounting sideways on truss or stood upright on a flat level surface.
Page 7
The OLED control panel situated on the front of the fixture allows the user to access the menu system to adjust the fixtures settings. When the unit has been powered on the display will show “CYC100 RGBW Cyclorama”. The fixture will then return to its home screen.
Page 8
000-255 5. Dimmer 000-255 6. Strobe 000-255 Fixture Hour Fixture Run Time Fixture Information Firmware Version CPU-A V x.x B x.x Fixture Firmware Version Special Functions Factory Settings Default Factory Settings CYC100 RGBW 100W COB Cyclorama Wash www.prolight.co.uk User Manual...
Page 11
Please note: the Show modes will not function without the dimmer channel being greater than 0. When using Master/Slave mode via the show modes the slave should be set to Show 0. CYC100 RGBW 100W COB Cyclorama Wash www.prolight.co.uk User Manual...
CABL10 – 2m CABL11 – 5m CABL12 – 10m 5-Pin: CABL185 – 2m CABL187 – 5m CABL188 – 10m Also remember that DMX cable must be daisy chained and cannot be split. CYC100 RGBW 100W COB Cyclorama Wash www.prolight.co.uk User Manual...
Page 13
3-pin XLR (female) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C CYC100 RGBW 100W COB Cyclorama Wash www.prolight.co.uk User Manual...
Page 14
Please note: Caution should be used when power linking other fixtures to the CYC100 RGBW 100W COB Cyclorama Wash as the power consumption of other fixtures will vary. Fixtures fitted with lamps often require 2/3 times more current on startup, these may require their own power source.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. CYC100 RGBW 100W COB Cyclorama Wash www.prolight.co.uk User Manual...
Need help?
Do you have a question about the CYC100 and is the answer not in the manual?
Questions and answers