Epson SureColor P Series Setup And Maintenance page 18

Remove the ink cartridges from their packages, then gently shake each cartridge for about 10 seconds.
4.
Install the ink cartridges in the slots that correspond to each cartridge. Hold each cartridge with the
5.
arrow pointing toward the printer, then insert it into its slot until it clicks into place. Make sure you
insert each cartridge all the way into the correct slot.
After installing all of the cartridges, close the ink covers. The printer begins charging the ink delivery
6.
system. Ink charging takes approximately 45 minutes.
Caution: During ink charging, do not open any covers except the roll paper cover. This will interrupt the ink
charging process, resulting in a restart of the procedure and consuming additional ink.
After ink charging is complete, you will need to load paper before the printer is ready to print.
Installing ink |
17