Wiring Plan; Set Up; Setup Steps - Vega VEGABAR S 14 Operating Instructions Manual

Information:
Note the correct arrangement, see illustra-
tion
Tighten the screws on the strain relief and
9
cable entry
10 Hook in the cover and push onto the plug
connection, tighten cover screw
11 Plug the plug insert with seal to VEGABAR S
14 and tighten the screw
The electrical connection is finished.

4.3 Wiring plan

Angled plug connector according to ISO 4400
1
3
2
Fig. 15: Version: Electrical connection "Y", view to the connection on
the instrument side
1
Voltage supply and signal output
Round plug connector M12 x 1
2 1
3 3 4
Fig. 16: Version: Electrical connection "M", view to the connection on
the instrument side
1
Voltage supply and signal output
VEGABAR S 14

5 Set up

5.1 Setup steps

After mounting and electrical connection, VEGA-
BAR S 14 is ready for operation.
VEGABAR S 14 delivers a current of 4 ... 20 mA
corresponding to the actual process pressure.
Further settings are not necessary.
+
1
-
+
1
-
Set up
19