Media - PEUGEOT 108 Handbook

Hide thumbs Also See for 108:
Table of Contents

Advertisement

If "DAB AF" tracking is enabled, there
is a lag of a few seconds while the
system switches to "FM" analogue radio,
sometimes with a change in volume.
Once the digital signal quality becomes
good again, the system automatically
changes back to "DAB".
If the "DAB" station being listened to is
not available, or if the "DAB AF" is not
enabled, the sound is muted when the
quality of the digital signal becomes too
poor.

Media

USB USB
Insert the USB memory stick in the USB port or
connect the USB device to the USB port using
a suitable cable (not supplied).
The system builds playlists (in temporary
memory), an operation which can take
from a few seconds to several minutes at
the first connection.
Reduce the number of non-music files
and the number of folders to reduce the
waiting time.
The playlists are updated every time the
ignition is switched off or a USB stick is
connected. However, the audio system
saves these lists and loading time will be
reduced if they have not been changed.
Auxiliary socket (AUX)
Connect the portable device (MP3 player, etc.)
to the JACK socket using an audio cable.
Information and advice
The audio system reads files with the following
extensions:
".wma," Ver7 and Ver8 types with a flow rate
between 48 and 192 Kbps and Ver9 with a rate
between 48 and 320 Kbps.
".aac," with a flow rate between 16 Kbps and
320 Kbps.
".mp3 - MPEG1" with a flow rate between
32 and 320 Kbps and ".mp3 - MPEG2" at a rate
between 8 to 160 Kbps.
Sampling frequencies supported are 11, 22,
44 and 48 kHz.
Use only USB memory sticks in FAT32 format
(File Allocation Table).
To avoid any playback or display issues, it is
advisable to create file names that have less
than 20 characters and without using any
special characters (e.g.: " " ?.; ù).
The system supports mobile USB Mass
Storage players or Apple
®
at the USB
ports. An adapter cable is not supplied.
Device management is done by the audio
system controls.
Other devices not recognized by the
system during connection must be
connected to the auxiliary socket using
a Jack cable (not supplied).
Radio
.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents