Spare Wheel - PEUGEOT 108 Handbook

F Switch on the compressor by moving the
switch to the "I" position and adjust the
pressure as shown on the vehicle tyre
pressure label. To deflate: press the black
button on the compressor hose by the valve
connector.
If a pressure of 2 bars is not reached after
7 minutes, this indicates that the tyre is not
repairable; contact a PEUGEOT dealer or
a qualified workshop for assistance.
F Once the correct pressure is reached, put
the switch to the "O" position.
F Remove the kit then stow it.
Do not drive more than 120 mph
(200 km/h) with the repaired tyre; see
a PEUGEOT dealer or a qualified
workshop to change the tyre.
Tyre under-inflation detection
After a tyre repair, the warning
lamp will remain on until the
system is reset.
For more information on Tyre under-
inflation detection, refer to the
corresponding section.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on Tyre under-
inflation detection, refer to the
corresponding section.

Spare wheel

Scan the QR code on page 3 to view
explanatory videos.
In the event of a breakdown
Procedure for changing a damaged wheel with
the spare wheel using the tools provided with
the vehicle.
Access to the spare wheel
and the tools
Depending on the version, the spare wheel
and the tools are installed in the boot under the
floor.
F Remove the boot carpet.
F Remove the support box.
F Unscrew the central bolt retaining the
wheel.
F Remove the wheel.
8
107