Paragon EL7100 General Instructions Manual page 10

REVIEW - This key allows the user to review all the programmed steps using displays
condensed to show as much information as possible on one display. The user
will not be able to change the program in the Review mode.
When pressed from the RUN mode or any programming step within a menu
header, the control will return to the TIME menu header.
When pressed from any menu header during review, the control will move to
the next menu header.
When pressed from a review step, the control returns to that menu header.
RUN - This key will return the control to the RUN mode.
From all programming steps (excluding the override menu), the control will
perform a status update and return to the RUN mode.
From all review steps, the control will go straight to the RUN mode without
updating. If the REVIEW key was pressed while in a programming step the
control will perform a status update and return to the run mode.
When in the override menu, this key will return the selected channel from an over-
ride to the current event status shown and return the control to the RUN mode.
10