Advertisement
4. Connect antenna
After connecting antenna, push POWER button
to turn device on.
6. Login to Home Center 2
After completing previous step You will access
HC2 control panel. Choose Your language version
and enter user name and password. Defaults are:
admin / admin.
LED Indicators
POWER
LAN
INTERNET
Z-WAVE
LEARN MODE [blinking slowly] - adding device
LEARN MODE [blinking] - removing device
LEARN MODE [blinking fast] - device added /
removed successfully
RECOVERY
UPDATE [blinking] - software update available
SERVICE [blinking] - software update in progress.
POWER
For more information go to www. baro.com
5. Start Your internet browser
After ca 2 minutes HC2 is ready to operate. By default
HC2 awaits for Your DHCP server to assign IP address.
If unsure how it works, You can set HC2 to static IP by
pushing and holding RECOVERY button with power
ON.
HC2 will reset to static IP 192.168.81.1. To access HC2
login panel, please type IP address in Your web
browser address bar.
Back panel buttons
POWER button
Click to turn power ON
Click (at powr ON) to reset device
Hold for ca 10 seconds to turn power OFF
RECOVERY button
To access RECOVERY MODE disconnect
plug from power socket and hold Recovery
button while plugging it back.
Click to enter LEARN MODE (add device)
Double Click to enter LEARN MODE
(remove device)
Hold to set static IP.
Advertisement
