Motorola Avigilon HD-NVR4-PRM-64TB User Manual page 10

Important: Your operating system drive will be erased and restored to factory settings. Before you
proceed with operating system recovery, complete any necessary backups of custom ACC
configuration and video recordings. For more information about ACC software backups, see
http://avigilon.com/recovery.
Note: Depending on when your NVR4 Value was shipped, it is recommended that you connect to
the network when possible to install updates for Windows and ACC Client software after system
recovery is completed. For more information about ACC software installations, see
http://avigilon.com/recovery.
1. Start operating system recovery in one of the following ways:
On your Windows desktop, select
l
On your locked Windows screen, select
l
Restart.
During direct boot of the operating system, repeatedly press the down-arrow key and select
l
the partition.
2. On the Choose an option screen, select Use another operating system.
3. Select the OS Recovery partition.
4. On the Avigilon Recovery window, select Recover.
Allow up to half an hour for the recovery to complete.
5. After system reboot, complete the Windows setup process. For more information, see
Windows 10 on page 5.
6. Navigate to C:\Avigilon\Control Center Installation Files, and run the ACC installer
for the version of ACC software in use at your site.
Operating System Recovery By Avigilon Recovery Partition
and then hold down the Shift key and select Restart.
and then hold down the Shift key and select
Configuring
7