Table of Contents
Advertisement
1. At the top of the recorder, unlock the latch release then lift and rotate the latch towards the back of
the recorder.
The cover slides back and is released from the recorder body.
2. Hold the cover from both sides and lift it off the recorder.
3. Locate the failed hard drive on the center hard drive tray.
4. Lift the handles on either side of the hard drive tray.
5. Press the orange release tab on the hard drive tray then lift up the hard drive carrier handle to release
the hard drive.
6. Hold the handle and lift the hard drive out of the tray.
7. While holding the handle, pull the edges of the carrier away from the hard drive to remove the failed
hard drive from the carrier.
8. Align the slots on the new hard drive to the tabs on the hard drive carrier.
Replacing Center Hard Drives
13
Advertisement
Table of Contents
