Replacing A Hard Drive Blank - Motorola Avigilon HD-NVR4-PRM-64TB User Manual

Replacing a Hard Drive Blank

The hard drives on the Network Video Recorder are set up in a RAID configuration. This allows information
to be recorded across several hard drives.
If one or two hard drives fail, there is enough information on the other hard drives for the recorder to
continue recording video.
Depending on the recorder model, there may be hard drive blanks at the front of the recorder. You can
replace the blanks with hard drives as required.
1. Remove the bezel.
a. Unlock the bezel.
b. Push the release button next to the lock.
c. Pull the left end of the bezel then unhook the right end to remove the bezel.
2. Press the release button and slide the blank out of the hard drive slot.
Replacing a Hard Drive Blank 10