Time-Setting Options; Programming The Cooking Time; The Kitchen Timer - Siemens EX9 LX Series Instruction Manual

Time-setting options

en
OTime-setting options
Y our hob has three timer functions:
T i m e - s e t t i n g o p t i o n s

Programming the cooking time

■
Kitchen timer
■
Stopwatch function
■
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
Touch the symbol twice.
0
1.
light up in the timer display.
Select the hotplate. The
2.
Within the next 10 seconds, set the required cooking
3.
time in the settings range.
Touch the symbol to confirm the selected setting.
0
4.
Select the required heat setting.
5.
The cooking time begins to elapse.
Notes
The same cooking time can be set automatically for
■
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
If the flexible cooking zone is selected as the only
■
hotplate, the set time for the entire cooking zone is
the same.
If the Move function is selected for the combined
■
hotplate, the set time for the three hotplates is the
same.
16
and the indicator
‹‹ x
indicator lights up.
x
Frying sensor
If a cooking time has been programmed for a hotplate
and the frying sensor has been activated, the cooking
time will not begin to count down until the selected
temperature setting has been reached.
Changing or deleting the time
Touch the symbol twice and then select the hotplate.
0
Change the cooking time in the settings area or set
to delete the programmed cooking time.
Touch the symbol to confirm the selected setting.
0
When the time has elapsed
The hotplate switches itself off, the
and the hotplate displays
and the indicator flash in the timer display.
‹‹ x
When the symbol is touched, the indicators go out
0
and the acoustic signal ceases.
Notes
If a cooking time has been programmed for several
■
hotplates, the shortest cooking time appears in the
timer display.
To query a hotplate's remaining cooking time, touch
■
the symbol twice and select the hotplate.
0
You can set a cooking time of up to
■

The kitchen timer

You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
Touch the symbol.
0
1.
up in the timer display.
Select the required time in the settings area and
2.
confirm this setting by touching the
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the 0 symbol.
Change the cooking time in the settings area or set
to delete the programmed cooking time.
Touch the symbol to confirm the selected setting.
0
When the time has elapsed
An audible signal sounds once the time has elapsed.
‹‹ and the V symbol flash in the timer display.
The indicators go out after touching the
indicator flashes
x
. An audible signal sounds.
‹
ŠŠ minutes.
and the indicator light
‹‹ V
symbol.
0
symbol.
0
‹‹
‹‹