Hood Connection; Setting Up - Siemens EX9 LX Series Instruction Manual

eHood connection
H o o d c o n n e c t i o n
You can connect this appliance to a suitable extractor
hood and then control the functions of the hood via your
hob.
You have various options for connecting the appliances
together:
Home Connect
Two appliances can be connected using the Home
Connect app provided that both of them are Home
Connect-compatible.
Both appliances can be controlled via the app and via
the control panel.
Refer to the Home Connect documents supplied and
the Home Connect section for more information.
~ "Home Connect" on page 30
Connecting appliances directly
If the appliance is connected directly to an extractor
hood, the extractor hood can be controlled via the hob.
It is then not possible for either of the appliances to
connect to your home network or to the app. Both
appliances can be controlled via the control panel.
Connecting appliances via your home network
Use this type of connection if neither or one of the two
appliances is connected to the Home Connect app.
If the appliances are connected to each other via your
home network, you can use both the hood controls and
Home Connect to operate the hob.
Notes
Make sure you follow the safety instructions in the
■
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the
hob.~ "Important safety information" on page 5
If the appliance is being operated by means of the
■
controls on the extractor hood, this mode of
operation always has priority. It is not possible to use
the hood controls on the hob during this time.
In networked standby mode, your appliance requires
■
a maximum of 2 W.

Setting up

To set up the connection between the hob and the
extractor hood, the hob must be switched on.
Connecting directly
Make sure that the extractor hood is switched off.
For more information refer to the section entitled
"Connecting to the hob" in the instruction manual for
your extractor hood.
Note:
If you connect your hob directly to the extractor hood, it
cannot be connected to your home network as well and
you will not be able to use Home Connect.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the symbol repeatedly until the
0
3.
setting appears.
lights up in the hotplate display.
‹
Set the value in the settings area.
‚
4.
flashes in the hotplate display.
‚
You have two minutes to initiate the connection
5.
process on the extractor hood.
Once the hob is connected to the extractor hood, the
value appears in the hotplate display. After you exit
„
the settings menu, the symbols for the hob-based hood
controls are displayed in the hob's control panel.

Hood connection

symbol for four seconds.
0
™‚‡
en
35