Trouble Shooting - Paralinx Tomahawk User Manual

TROUBLE SHOOTING

TROUBLE
SHOOTING
.
1. IF THE MONITOR DISPLAYS A BLACK SCREEN WITH A RED, FOUR-BAR SIGNAL ICON IN THE CORNER,
THE SIGNAL HAS BEEN LOST, AND THE SEARCH PROCESS MUST MANUALLY BE RESTARTED. THERE ARE
SEVERAL WAYS OF DOING THIS:
- THE RECEIVER MAY BE POWER CYCLED VIA THE ON/OFF SWITCH
- THE RECEIVER MAY BE POWER CYCLED VIA THE REMOTE (THE IR CABLE MUST BE PLUGGED INTO THE
RECEIVER):
- USING THE "GUEST" BUTTON ON THE SUPPLIED REMOTE: PRESS ONCE TO GO TO STANDBY, PRESS
ONCE MORE TO RESUME
- PRESS THE "MENU" BUTTON, SELECT "DISCONNECT WIRELESS LINK", THEN RECONNECT EITHER BY
PRESSING THE
APPROPRIATE "INPUT DEVICES" HOTKEY, OR BY PRESSING THE "SOURCE" HOTKEY, AND SELECTING THE
APPROPRIATE INPUT SOURCE
2. IF THE RECEIVER AND TRANSMITTER ARE BOTH POWER-CYCLED, BUT ONLY A BLACK SCREEN
IS SHOWN, FIRST CHECK THAT YOU SOURCE IS OUTPUTTING SOMETHING OTHER THAN A BLACK
SCREEN, THEN UNPLUG THE SOURCE FROM THE TRANSMITTER AND RE-INSERT THE VIDEO SOURCE
CABLE.
3. THE TOMAHAWK SHOULD BE ABLE TO FIND A DFS FREQUENCY WITHIN 60 SECONDS IN NORMAL
CONDITIONS, BUT IT MAY TAKE LONGER IN AREAS WITH MORE INTERFERENCE. IF THIS PROCESS IS
NOT IDEAL, DFS CAN BE TURNED OFF BY SWITCHING BOTH TRANSMITTER AND RECEIVER TO MULTI-
LINK MODE (SEE PAGE 19 OF INSTRUCTION MANUAL)
FOR ADDITIONAL INFORMATION AND SUPPORT VISIT OUR KNOWLEDGE BASE AT:
WWW.PARALINX.NET/HELP
PARALINX TOMAHAWK
23