Connect The Power Cable - SIKA Aliva 257 Top User Manual

3 Startup
3.4

Connect the power cable

Electrical shock
• If electrical components are exposed to moisture, there is a risk of electrical
NOTE
• Refer to the details in the Control cabinet and in the electrical schematic for the
required connection voltage of machine.
If you have your own power cable with a 5-pin CEE connector,
Fig. 3.14
Connect the power
cable
NOTE
If you do not have your own power cable with a 5-pin CEE connector:
Contract an electrician to connect the electrical supply plug to a cable for you.
Details of the cable cross-section are contained in the electrical schematic of
the control cabinet.
Plug the 5-pin CEE connector with power cable into the attachment unit plug.
The power cable is now connected.
30
shock.
Protect all electrical components from moisture.
Version 1.0
Operating instructions Aliva-257 Top
WARNING
!
Remove the supplied electrical supply
plug and plug yours with the power
cable into the attachment unit plug.
The power cable is now connected.
257.028