Decommissioning; Transporting - SIKA Aliva 257 Top User Manual

Maintenance instructions Aliva-257 Top
4

Decommissioning

4.1

Transporting

Machine can slip and tilt over
• There is a risk of death and serious injuries if the machine slips or tilts over
NOTE
Always clean the machine before transport.
Load the machine onto the lorry using suitable lifting gear.
Fig. 4.1
2
Hook-on the lifting
gear
1 Crane eyes
2 Slots
NOTE
• The machine tips down slightly towards the side of the rotor when lifting.
• Only ever secure the machine to the lorry at the lifting eyes and at the rear
and front axle to ensure that the cover plates are not bent.
during transport.
Secure the machine against slippage and tilt.
1 2
Version 1.0
HAZARD
!
Attach the hooks of the lifting gear to
the crane eyes 1.
Slightly tighten the crane rope.
Place the crane rope in the slots 2 on
the filling hopper.
Lift up the machine and place it down
directly on the load area of the lorry.
WARNING: The machine can tip towards
the side in the direction of the filling
hopper on lifting!
The machine can be transported.
257.015
4 Decommissioning
51