Field Controls FIELD DIRECT VENT SYSTEM REDUCING TEE Manual
  1. Manuals
  2. Brands
  3. Field Controls Manuals
  4. Fan
  5. FIELD DIRECT VENT SYSTEM REDUCING TEE
  6. Manual

Field Controls FIELD DIRECT VENT SYSTEM REDUCING TEE Manual

Hide thumbs
1
2
3
4

Advertisement

Table of Contents

FIELD DIRECT VENT SYSTEM
REDUCING TEE
Model: FDVS WITH REDUCING TEE
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of
a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
Please retain these instructions after installation.
Installed By:
Phone:
Installation Date:
www.fieldcontrols.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FIELD DIRECT VENT SYSTEM REDUCING TEE and is the answer not in the manual?

Questions and answers

Related Manuals for Field Controls FIELD DIRECT VENT SYSTEM REDUCING TEE

Summary of Contents for Field Controls FIELD DIRECT VENT SYSTEM REDUCING TEE

  • Page 1 FIELD DIRECT VENT SYSTEM REDUCING TEE Model: FDVS WITH REDUCING TEE READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION. This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions. The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions required, and has complied with all the requirements of the authority having jurisdiction.
  • Page 2 REDUCING TEE INSTALLATION 1. Apply a bead of sealant to appliance collar approximately 1" from end of collar. (See Figure 1) 2. Remove all oil and grease from the inside of the appliance reducing tee and apply a bead of sealant to inside of reducing tee ⁄...
  • Page 3 JOINT ASSEMBLY: VENT PIPE TO TERMINATION AND REDUCING TEE If necessary, the vent pipe may be cut to length with a hacksaw or cut off saw. CAUTION: Use safety glasses and other appropriate safety gear. 1. Pull outer vent pipe back 1-2" from inner vent pipe end and remove insulation.
  • Page 4 Warranty For warranty information about this or any Field Controls product, visit: www.fieldcontrols.com/warranty Phone: 252.522.3031 • Fax: 252.522.0214 www.fieldcontrols.com © Field Controls, LLC P/N 46543300 Rev B 05/15...

Table of Contents