Troubleshooting - Zanussi ZWC 1301 User Manual

Hide thumbs Also See for ZWC 1301:
Table of Contents

Advertisement

Programmes
2)
Wool plus 30°C
Standard cotton programmes
Standard 60°C cot-
ton
Standard 60°C cot-
ton
Standard 40°C cot-
ton
1) At the end of spin phase.
2) Not available for some models.
Off Mode (W)
The information given in the chart above is compliant with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC .

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
INTRODUCTION
Certain problems are due to lack of simple
maintenance or oversights, which can be solved
easily without calling out an engineer. Before
contacting your Authorised Service Centre, please
carry out the checks listed below.
18
Energy con-
Load (kg)
sumption
(kWh)
1
0,30
3
0,59
1,5
0,54
1,5
0,49
0.10
Approximate
Water con-
programme
sumption (li-
duration (mi-
tre)
60
42
38
38
Left On Mode (W)
During machine operation it is possible that the
End pilot light blinks to indicate that the machine is
not working:
1 flash: problem with the water supply.
2 flashes: problem with the water draining.
4 flashes: door open.
Once the problem has been eliminated, press the
button START to restart the programme. If after all
checks, the problem persists, contact your
Authorised Service Centre.
Remaining
moisture (%)
nutes)
75
30
127
52
127
52
137
52
0.98
1)

Advertisement

Table of Contents
loading

Table of Contents