Table of Contents
Advertisement
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
1. Spread some of the polystyrene packaging
materials on the floor behind the machine and
then lay the machine carefully rear side down
on them. Make sure that no hoses are crushed
in the process.
2. Remove the polystyrene base from the bottom
of the appliance.
3. Return machine to it's upright position and
remove the power supply cable and the
draining and inlet hose from the hose holders
on the rear of the appliance.
4. With a suitable spanner unscrew and remove
the three screws and their spacers on
machine's rear.
5. The three holes must then be plugged with the
plastic plug caps supplied in the bag
containing the instruction booklet, which can
be found inside the drum.
LIFTING THE MACHINE
Be careful when lifting the machine. Incorrect
methods of lifting can cause physical injuries and
also increase the risk of damage to the machine.
Open the door and take hold of the top inside of
the door opening. You can also lift the machine by
gripping the rear overhang of the top.
WARNING! Never lift the machine by
gripping it's control panel, door, or
detergent dispenser.
5
Advertisement
Table of Contents
