Important Safety Instructions - OGI TotalArc BMS 460246 SOLAR POWER Operator's Manual

Table of Contents

Advertisement

DANGER!
Read and understand all instructions before using this
product. Failure to follow all instructions listed below may
result in electric shock, fire, serious personal injury, and/or
death.
READ ALL INSTRUCTIONS
For safe operation, read, and understand all
instructions before using this product. Follow all safety
instructions. Failure to follow all safety instructions
listed below can result in serious personal injury.
Do not allow untrained individuals to use this unit.
Check the work area before each use.
Use Safety Glasses – Always wear eye protection with
side shields marked to comply with ANSI Z87.1.
Stay alert – Do not operate this unit when you are tired,
ill, upset, or under the influence of alcohol, drugs, or
medication.
Do not install or operate in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Area of classification at time of installation must
be General location.
To reduce the risk of electric shock, this control system has
polarized connection points. Check installation
instructions.
Disconnect Power source before opening control
enclosure, servicing, or performing maintenance tasks.
Use only identical manufacturer's replacement
parts and accessories. Use of any other parts may
create a hazard or cause product damage.

IMPORTANT SAFETY INSTRUCTIONS

Maintain TotalArc Relighter with care – Follow
instructions for changing components. Inspect control
cable periodically and if damaged have it replaced by
an authorized service facility.
Make sure all control cable clam shell guards are
properly and securely attached prior to power up
stage.
Use only the manufacturer's replacement clam shells,
cables, and battery.
Keep the area around the enclosure clear and free of
debris to allow proper air flow around the enclosure.
If a solar unit is not operated during a prolonged
period of time, the unit's power switch should be
placed in the OFF position, but power to the unit
should be maintained ON to allow the internal
batteries to be charged.
Keep solar panel covered until after full TotalArc
Relighter installation. Solar panel voltage will be live
and unregulated if uncovered before installation
It is recommended that units with battery back up
storage have the batteries replaced at the beginning
of each heating season to guarantee operation of the
unit during the critical operation season.
If relighter is not working as it should, call OGI service
department, available 24/7 to assist you with
installation, operation, and troubelshooting.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this relighter.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents